Step 1: start by printing the bat template. Cut out both shapes of the template.
2
Step 2: put the templates on the black foam sheet by trying to take the less space as possible (see picture above) to keep some black foam for the pumpkin monster later on.
3
Step 3: outline the shapes with a pen on the foam sheet.
4
Step 4: cut the drawn shapes out of the foam sheet.
5
Step 5: take the shape of the bat's head and wrap it around the bottle and add a dot of glue with the glue gun on one of the two ends. Then, apply it over the other end.
6
Step 6: then, take the bat's wings and add some glue in the middle. Apply the wings at the back of the bat.
7
Step 7: glue two googly eyes underneath the bat's ears. The bat is ready to fly away!
8
Step 8: repeat the previous steps for the pumpkin monster.
9
Step 9: glue both eyes in the middle of the orange strip. The pumkin monster is ready to haunt you!
10
Step 10: for the mummy, cut out some strips of white foam by following the template. Cut one of the strips in half lengthwise (for the final step).
11
Step 11: glue a strip around the bottle by proceeding the same way as you did for the previous characters.
12
Step 12: glue one of the ends of two strips at the back of the strip that we have just applied. Then, criss-cross these two strips at the front of the bottle and fasten them at the back.
13
Step 13: repeat this step until you're at 1 cm from the bottle's cap.
14
Step 14: once the strips are in place, glue the eyes in the middle of the first upper strip.
15
Step 15: apply the two thinner strips by placing them over and under the eyes. Glue them at the back.
16
Step 16: with the lefover strips, finish by hiding a part of the back of the bottle, on the visible junctions.
17
Step 17: use the tip of your scissors to punch a hole in the center of each bottle cap.
18
Step 18: carefully clean up the inside of the cap by cutting off the little plastic bits.
19
Step 19: Fill the bottle with your favourite drink, put the cap on - and that's it!
Beware! These terrifying creatures are out for Halloween!
